This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Troubleshooting Applications

Debugging common containerized application issues.

This doc contains a set of resources for fixing issues with containerized applications. It covers things like common issues with Kubernetes resources (like Pods, Services, or StatefulSets), advice on making sense of container termination messages, and ways to debug running containers.

1 - Debug Pods

This guide is to help users debug applications that are deployed into Kubernetes and not behaving correctly. This is not a guide for people who want to debug their cluster. For that you should check out this guide.

Diagnosing the problem

The first step in troubleshooting is triage. What is the problem? Is it your Pods, your Replication Controller or your Service?

Debugging Pods

The first step in debugging a Pod is taking a look at it. Check the current state of the Pod and recent events with the following command:

kubectl describe pods ${POD_NAME}

Look at the state of the containers in the pod. Are they all Running? Have there been recent restarts?

Continue debugging depending on the state of the pods.

My pod stays pending

If a Pod is stuck in Pending it means that it can not be scheduled onto a node. Generally this is because there are insufficient resources of one type or another that prevent scheduling. Look at the output of the kubectl describe ... command above. There should be messages from the scheduler about why it can not schedule your pod. Reasons include:

  • You don't have enough resources: You may have exhausted the supply of CPU or Memory in your cluster, in this case you need to delete Pods, adjust resource requests, or add new nodes to your cluster. See Compute Resources document for more information.

  • You are using hostPort: When you bind a Pod to a hostPort there are a limited number of places that pod can be scheduled. In most cases, hostPort is unnecessary, try using a Service object to expose your Pod. If you do require hostPort then you can only schedule as many Pods as there are nodes in your Kubernetes cluster.

My pod stays waiting

If a Pod is stuck in the Waiting state, then it has been scheduled to a worker node, but it can't run on that machine. Again, the information from kubectl describe ... should be informative. The most common cause of Waiting pods is a failure to pull the image. There are three things to check:

  • Make sure that you have the name of the image correct.
  • Have you pushed the image to the registry?
  • Try to manually pull the image to see if the image can be pulled. For example, if you use Docker on your PC, run docker pull <image>.

My pod stays terminating

If a Pod is stuck in the Terminating state, it means that a deletion has been issued for the Pod, but the control plane is unable to delete the Pod object.

This typically happens if the Pod has a finalizer and there is an admission webhook installed in the cluster that prevents the control plane from removing the finalizer.

To identify this scenario, check if your cluster has any ValidatingWebhookConfiguration or MutatingWebhookConfiguration that target UPDATE operations for pods resources.

If the webhook is provided by a third-party:

  • Make sure you are using the latest version.
  • Disable the webhook for UPDATE operations.
  • Report an issue with the corresponding provider.

If you are the author of the webhook:

  • For a mutating webhook, make sure it never changes immutable fields on UPDATE operations. For example, changes to containers are usually not allowed.
  • For a validating webhook, make sure that your validation policies only apply to new changes. In other words, you should allow Pods with existing violations to pass validation. This allows Pods that were created before the validating webhook was installed to continue running.

My pod is crashing or otherwise unhealthy

Once your pod has been scheduled, the methods described in Debug Running Pods are available for debugging.

My pod is running but not doing what I told it to do

If your pod is not behaving as you expected, it may be that there was an error in your pod description (e.g. mypod.yaml file on your local machine), and that the error was silently ignored when you created the pod. Often a section of the pod description is nested incorrectly, or a key name is typed incorrectly, and so the key is ignored. For example, if you misspelled command as commnd then the pod will be created but will not use the command line you intended it to use.

The first thing to do is to delete your pod and try creating it again with the --validate option. For example, run kubectl apply --validate -f mypod.yaml. If you misspelled command as commnd then will give an error like this:

I0805 10:43:25.129850   46757 schema.go:126] unknown field: commnd
I0805 10:43:25.129973   46757 schema.go:129] this may be a false alarm, see https://github.com/kubernetes/kubernetes/issues/6842
pods/mypod

The next thing to check is whether the pod on the apiserver matches the pod you meant to create (e.g. in a yaml file on your local machine). For example, run kubectl get pods/mypod -o yaml > mypod-on-apiserver.yaml and then manually compare the original pod description, mypod.yaml with the one you got back from apiserver, mypod-on-apiserver.yaml. There will typically be some lines on the "apiserver" version that are not on the original version. This is expected. However, if there are lines on the original that are not on the apiserver version, then this may indicate a problem with your pod spec.

Debugging Replication Controllers

Replication controllers are fairly straightforward. They can either create Pods or they can't. If they can't create pods, then please refer to the instructions above to debug your pods.

You can also use kubectl describe rc ${CONTROLLER_NAME} to introspect events related to the replication controller.

Debugging Services

Services provide load balancing across a set of pods. There are several common problems that can make Services not work properly. The following instructions should help debug Service problems.

First, verify that there are endpoints for the service. For every Service object, the apiserver makes an endpoints resource available.

You can view this resource with:

kubectl get endpoints ${SERVICE_NAME}

Make sure that the endpoints match up with the number of pods that you expect to be members of your service. For example, if your Service is for an nginx container with 3 replicas, you would expect to see three different IP addresses in the Service's endpoints.

My service is missing endpoints

If you are missing endpoints, try listing pods using the labels that Service uses. Imagine that you have a Service where the labels are:

...
spec:
  - selector:
     name: nginx
     type: frontend

You can use:

kubectl get pods --selector=name=nginx,type=frontend

to list pods that match this selector. Verify that the list matches the Pods that you expect to provide your Service. Verify that the pod's containerPort matches up with the Service's targetPort

Network traffic is not forwarded

Please see debugging service for more information.

What's next

If none of the above solves your problem, follow the instructions in Debugging Service document to make sure that your Service is running, has Endpoints, and your Pods are actually serving; you have DNS working, iptables rules installed, and kube-proxy does not seem to be misbehaving.

You may also visit troubleshooting document for more information.

2 - Debug Services

An issue that comes up rather frequently for new installations of Kubernetes is that a Service is not working properly. You've run your Pods through a Deployment (or other workload controller) and created a Service, but you get no response when you try to access it. This document will hopefully help you to figure out what's going wrong.

Running commands in a Pod

For many steps here you will want to see what a Pod running in the cluster sees. The simplest way to do this is to run an interactive busybox Pod:

kubectl run -it --rm --restart=Never busybox --image=gcr.io/google-containers/busybox sh

If you already have a running Pod that you prefer to use, you can run a command in it using:

kubectl exec <POD-NAME> -c <CONTAINER-NAME> -- <COMMAND>

Setup

For the purposes of this walk-through, let's run some Pods. Since you're probably debugging your own Service you can substitute your own details, or you can follow along and get a second data point.

kubectl create deployment hostnames --image=registry.k8s.io/serve_hostname

deployment.apps/hostnames created

kubectl commands will print the type and name of the resource created or mutated, which can then be used in subsequent commands.

Let's scale the deployment to 3 replicas.

kubectl scale deployment hostnames --replicas=3

deployment.apps/hostnames scaled

Note that this is the same as if you had started the Deployment with the following YAML:

apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    app: hostnames
  name: hostnames
spec:
  selector:
    matchLabels:
      app: hostnames
  replicas: 3
  template:
    metadata:
      labels:
        app: hostnames
    spec:
      containers:
      - name: hostnames
        image: registry.k8s.io/serve_hostname

The label "app" is automatically set by kubectl create deployment to the name of the Deployment.

You can confirm your Pods are running:

kubectl get pods -l app=hostnames

NAME                        READY     STATUS    RESTARTS   AGE
hostnames-632524106-bbpiw   1/1       Running   0          2m
hostnames-632524106-ly40y   1/1       Running   0          2m
hostnames-632524106-tlaok   1/1       Running   0          2m

You can also confirm that your Pods are serving. You can get the list of Pod IP addresses and test them directly.

kubectl get pods -l app=hostnames \
    -o go-template='{{range .items}}{{.status.podIP}}{{"\n"}}{{end}}'

10.244.0.5
10.244.0.6
10.244.0.7

The example container used for this walk-through serves its own hostname via HTTP on port 9376, but if you are debugging your own app, you'll want to use whatever port number your Pods are listening on.

From within a pod:

for ep in 10.244.0.5:9376 10.244.0.6:9376 10.244.0.7:9376; do
    wget -qO- $ep
done

This should produce something like:

hostnames-632524106-bbpiw
hostnames-632524106-ly40y
hostnames-632524106-tlaok

If you are not getting the responses you expect at this point, your Pods might not be healthy or might not be listening on the port you think they are. You might find kubectl logs to be useful for seeing what is happening, or perhaps you need to kubectl exec directly into your Pods and debug from there.

Assuming everything has gone to plan so far, you can start to investigate why your Service doesn't work.

Does the Service exist?

The astute reader will have noticed that you did not actually create a Service yet - that is intentional. This is a step that sometimes gets forgotten, and is the first thing to check.

What would happen if you tried to access a non-existent Service? If you have another Pod that consumes this Service by name you would get something like:

wget -O- hostnames

Resolving hostnames (hostnames)... failed: Name or service not known.
wget: unable to resolve host address 'hostnames'

The first thing to check is whether that Service actually exists:

kubectl get svc hostnames

No resources found.
Error from server (NotFound): services "hostnames" not found

Let's create the Service. As before, this is for the walk-through - you can use your own Service's details here.

kubectl expose deployment hostnames --port=80 --target-port=9376

service/hostnames exposed

And read it back:

kubectl get svc hostnames

NAME        TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)   AGE
hostnames   ClusterIP   10.0.1.175   <none>        80/TCP    5s

Now you know that the Service exists.

As before, this is the same as if you had started the Service with YAML:

apiVersion: v1
kind: Service
metadata:
  labels:
    app: hostnames
  name: hostnames
spec:
  selector:
    app: hostnames
  ports:
  - name: default
    protocol: TCP
    port: 80
    targetPort: 9376

In order to highlight the full range of configuration, the Service you created here uses a different port number than the Pods. For many real-world Services, these values might be the same.

Any Network Policy Ingress rules affecting the target Pods?

If you have deployed any Network Policy Ingress rules which may affect incoming traffic to hostnames-* Pods, these need to be reviewed.

Please refer to Network Policies for more details.

Does the Service work by DNS name?

One of the most common ways that clients consume a Service is through a DNS name.

From a Pod in the same Namespace:

nslookup hostnames

Address 1: 10.0.0.10 kube-dns.kube-system.svc.cluster.local

Name:      hostnames
Address 1: 10.0.1.175 hostnames.default.svc.cluster.local

If this fails, perhaps your Pod and Service are in different Namespaces, try a namespace-qualified name (again, from within a Pod):

nslookup hostnames.default

Address 1: 10.0.0.10 kube-dns.kube-system.svc.cluster.local

Name:      hostnames.default
Address 1: 10.0.1.175 hostnames.default.svc.cluster.local

If this works, you'll need to adjust your app to use a cross-namespace name, or run your app and Service in the same Namespace. If this still fails, try a fully-qualified name:

nslookup hostnames.default.svc.cluster.local

Address 1: 10.0.0.10 kube-dns.kube-system.svc.cluster.local

Name:      hostnames.default.svc.cluster.local
Address 1: 10.0.1.175 hostnames.default.svc.cluster.local

Note the suffix here: "default.svc.cluster.local". The "default" is the Namespace you're operating in. The "svc" denotes that this is a Service. The "cluster.local" is your cluster domain, which COULD be different in your own cluster.

You can also try this from a Node in the cluster:

nslookup hostnames.default.svc.cluster.local 10.0.0.10

Server:         10.0.0.10
Address:        10.0.0.10#53

Name:   hostnames.default.svc.cluster.local
Address: 10.0.1.175

If you are able to do a fully-qualified name lookup but not a relative one, you need to check that your /etc/resolv.conf file in your Pod is correct. From within a Pod:

cat /etc/resolv.conf

You should see something like:

nameserver 10.0.0.10
search default.svc.cluster.local svc.cluster.local cluster.local example.com
options ndots:5

The nameserver line must indicate your cluster's DNS Service. This is passed into kubelet with the --cluster-dns flag.

The search line must include an appropriate suffix for you to find the Service name. In this case it is looking for Services in the local Namespace ("default.svc.cluster.local"), Services in all Namespaces ("svc.cluster.local"), and lastly for names in the cluster ("cluster.local"). Depending on your own install you might have additional records after that (up to 6 total). The cluster suffix is passed into kubelet with the --cluster-domain flag. Throughout this document, the cluster suffix is assumed to be "cluster.local". Your own clusters might be configured differently, in which case you should change that in all of the previous commands.

The options line must set ndots high enough that your DNS client library considers search paths at all. Kubernetes sets this to 5 by default, which is high enough to cover all of the DNS names it generates.

Does any Service work by DNS name?

If the above still fails, DNS lookups are not working for your Service. You can take a step back and see what else is not working. The Kubernetes master Service should always work. From within a Pod:

nslookup kubernetes.default

Server:    10.0.0.10
Address 1: 10.0.0.10 kube-dns.kube-system.svc.cluster.local

Name:      kubernetes.default
Address 1: 10.0.0.1 kubernetes.default.svc.cluster.local

If this fails, please see the kube-proxy section of this document, or even go back to the top of this document and start over, but instead of debugging your own Service, debug the DNS Service.

Does the Service work by IP?

Assuming you have confirmed that DNS works, the next thing to test is whether your Service works by its IP address. From a Pod in your cluster, access the Service's IP (from kubectl get above).

for i in $(seq 1 3); do 
    wget -qO- 10.0.1.175:80
done

This should produce something like:

hostnames-632524106-bbpiw
hostnames-632524106-ly40y
hostnames-632524106-tlaok

If your Service is working, you should get correct responses. If not, there are a number of things that could be going wrong. Read on.

Is the Service defined correctly?

It might sound silly, but you should really double and triple check that your Service is correct and matches your Pod's port. Read back your Service and verify it:

kubectl get service hostnames -o json

{
    "kind": "Service",
    "apiVersion": "v1",
    "metadata": {
        "name": "hostnames",
        "namespace": "default",
        "uid": "428c8b6c-24bc-11e5-936d-42010af0a9bc",
        "resourceVersion": "347189",
        "creationTimestamp": "2015-07-07T15:24:29Z",
        "labels": {
            "app": "hostnames"
        }
    },
    "spec": {
        "ports": [
            {
                "name": "default",
                "protocol": "TCP",
                "port": 80,
                "targetPort": 9376,
                "nodePort": 0
            }
        ],
        "selector": {
            "app": "hostnames"
        },
        "clusterIP": "10.0.1.175",
        "type": "ClusterIP",
        "sessionAffinity": "None"
    },
    "status": {
        "loadBalancer": {}
    }
}
  • Is the Service port you are trying to access listed in spec.ports[]?
  • Is the targetPort correct for your Pods (some Pods use a different port than the Service)?
  • If you meant to use a numeric port, is it a number (9376) or a string "9376"?
  • If you meant to use a named port, do your Pods expose a port with the same name?
  • Is the port's protocol correct for your Pods?

Does the Service have any Endpoints?

If you got this far, you have confirmed that your Service is correctly defined and is resolved by DNS. Now let's check that the Pods you ran are actually being selected by the Service.

Earlier you saw that the Pods were running. You can re-check that:

kubectl get pods -l app=hostnames

NAME                        READY     STATUS    RESTARTS   AGE
hostnames-632524106-bbpiw   1/1       Running   0          1h
hostnames-632524106-ly40y   1/1       Running   0          1h
hostnames-632524106-tlaok   1/1       Running   0          1h

The -l app=hostnames argument is a label selector configured on the Service.

The "AGE" column says that these Pods are about an hour old, which implies that they are running fine and not crashing.

The "RESTARTS" column says that these pods are not crashing frequently or being restarted. Frequent restarts could lead to intermittent connectivity issues. If the restart count is high, read more about how to debug pods.

Inside the Kubernetes system is a control loop which evaluates the selector of every Service and saves the results into a corresponding Endpoints object.

kubectl get endpoints hostnames

NAME        ENDPOINTS
hostnames   10.244.0.5:9376,10.244.0.6:9376,10.244.0.7:9376

This confirms that the endpoints controller has found the correct Pods for your Service. If the ENDPOINTS column is <none>, you should check that the spec.selector field of your Service actually selects for metadata.labels values on your Pods. A common mistake is to have a typo or other error, such as the Service selecting for app=hostnames, but the Deployment specifying run=hostnames, as in versions previous to 1.18, where the kubectl run command could have been also used to create a Deployment.

Are the Pods working?

At this point, you know that your Service exists and has selected your Pods. At the beginning of this walk-through, you verified the Pods themselves. Let's check again that the Pods are actually working - you can bypass the Service mechanism and go straight to the Pods, as listed by the Endpoints above.

From within a Pod:

for ep in 10.244.0.5:9376 10.244.0.6:9376 10.244.0.7:9376; do
    wget -qO- $ep
done

This should produce something like:

hostnames-632524106-bbpiw
hostnames-632524106-ly40y
hostnames-632524106-tlaok

You expect each Pod in the Endpoints list to return its own hostname. If this is not what happens (or whatever the correct behavior is for your own Pods), you should investigate what's happening there.

Is the kube-proxy working?

If you get here, your Service is running, has Endpoints, and your Pods are actually serving. At this point, the whole Service proxy mechanism is suspect. Let's confirm it, piece by piece.

The default implementation of Services, and the one used on most clusters, is kube-proxy. This is a program that runs on every node and configures one of a small set of mechanisms for providing the Service abstraction. If your cluster does not use kube-proxy, the following sections will not apply, and you will have to investigate whatever implementation of Services you are using.

Is kube-proxy running?

Confirm that kube-proxy is running on your Nodes. Running directly on a Node, you should get something like the below:

ps auxw | grep kube-proxy

root  4194  0.4  0.1 101864 17696 ?    Sl Jul04  25:43 /usr/local/bin/kube-proxy --master=https://kubernetes-master --kubeconfig=/var/lib/kube-proxy/kubeconfig --v=2

Next, confirm that it is not failing something obvious, like contacting the master. To do this, you'll have to look at the logs. Accessing the logs depends on your Node OS. On some OSes it is a file, such as /var/log/kube-proxy.log, while other OSes use journalctl to access logs. You should see something like:

I1027 22:14:53.995134    5063 server.go:200] Running in resource-only container "/kube-proxy"
I1027 22:14:53.998163    5063 server.go:247] Using iptables Proxier.
I1027 22:14:54.038140    5063 proxier.go:352] Setting endpoints for "kube-system/kube-dns:dns-tcp" to [10.244.1.3:53]
I1027 22:14:54.038164    5063 proxier.go:352] Setting endpoints for "kube-system/kube-dns:dns" to [10.244.1.3:53]
I1027 22:14:54.038209    5063 proxier.go:352] Setting endpoints for "default/kubernetes:https" to [10.240.0.2:443]
I1027 22:14:54.038238    5063 proxier.go:429] Not syncing iptables until Services and Endpoints have been received from master
I1027 22:14:54.040048    5063 proxier.go:294] Adding new service "default/kubernetes:https" at 10.0.0.1:443/TCP
I1027 22:14:54.040154    5063 proxier.go:294] Adding new service "kube-system/kube-dns:dns" at 10.0.0.10:53/UDP
I1027 22:14:54.040223    5063 proxier.go:294] Adding new service "kube-system/kube-dns:dns-tcp" at 10.0.0.10:53/TCP

If you see error messages about not being able to contact the master, you should double-check your Node configuration and installation steps.

Kube-proxy can run in one of a few modes. In the log listed above, the line Using iptables Proxier indicates that kube-proxy is running in "iptables" mode. The most common other mode is "ipvs".

Iptables mode

In "iptables" mode, you should see something like the following on a Node:

iptables-save | grep hostnames

-A KUBE-SEP-57KPRZ3JQVENLNBR -s 10.244.3.6/32 -m comment --comment "default/hostnames:" -j MARK --set-xmark 0x00004000/0x00004000
-A KUBE-SEP-57KPRZ3JQVENLNBR -p tcp -m comment --comment "default/hostnames:" -m tcp -j DNAT --to-destination 10.244.3.6:9376
-A KUBE-SEP-WNBA2IHDGP2BOBGZ -s 10.244.1.7/32 -m comment --comment "default/hostnames:" -j MARK --set-xmark 0x00004000/0x00004000
-A KUBE-SEP-WNBA2IHDGP2BOBGZ -p tcp -m comment --comment "default/hostnames:" -m tcp -j DNAT --to-destination 10.244.1.7:9376
-A KUBE-SEP-X3P2623AGDH6CDF3 -s 10.244.2.3/32 -m comment --comment "default/hostnames:" -j MARK --set-xmark 0x00004000/0x00004000
-A KUBE-SEP-X3P2623AGDH6CDF3 -p tcp -m comment --comment "default/hostnames:" -m tcp -j DNAT --to-destination 10.244.2.3:9376
-A KUBE-SERVICES -d 10.0.1.175/32 -p tcp -m comment --comment "default/hostnames: cluster IP" -m tcp --dport 80 -j KUBE-SVC-NWV5X2332I4OT4T3
-A KUBE-SVC-NWV5X2332I4OT4T3 -m comment --comment "default/hostnames:" -m statistic --mode random --probability 0.33332999982 -j KUBE-SEP-WNBA2IHDGP2BOBGZ
-A KUBE-SVC-NWV5X2332I4OT4T3 -m comment --comment "default/hostnames:" -m statistic --mode random --probability 0.50000000000 -j KUBE-SEP-X3P2623AGDH6CDF3
-A KUBE-SVC-NWV5X2332I4OT4T3 -m comment --comment "default/hostnames:" -j KUBE-SEP-57KPRZ3JQVENLNBR

For each port of each Service, there should be 1 rule in KUBE-SERVICES and one KUBE-SVC-<hash> chain. For each Pod endpoint, there should be a small number of rules in that KUBE-SVC-<hash> and one KUBE-SEP-<hash> chain with a small number of rules in it. The exact rules will vary based on your exact config (including node-ports and load-balancers).

IPVS mode

In "ipvs" mode, you should see something like the following on a Node:

ipvsadm -ln

Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
...
TCP  10.0.1.175:80 rr
  -> 10.244.0.5:9376               Masq    1      0          0
  -> 10.244.0.6:9376               Masq    1      0          0
  -> 10.244.0.7:9376               Masq    1      0          0
...

For each port of each Service, plus any NodePorts, external IPs, and load-balancer IPs, kube-proxy will create a virtual server. For each Pod endpoint, it will create corresponding real servers. In this example, service hostnames(10.0.1.175:80) has 3 endpoints(10.244.0.5:9376, 10.244.0.6:9376, 10.244.0.7:9376).

Is kube-proxy proxying?

Assuming you do see one the above cases, try again to access your Service by IP from one of your Nodes:

curl 10.0.1.175:80

hostnames-632524106-bbpiw

If this still fails, look at the kube-proxy logs for specific lines like:

Setting endpoints for default/hostnames:default to [10.244.0.5:9376 10.244.0.6:9376 10.244.0.7:9376]

If you don't see those, try restarting kube-proxy with the -v flag set to 4, and then look at the logs again.

Edge case: A Pod fails to reach itself via the Service IP

This might sound unlikely, but it does happen and it is supposed to work.

This can happen when the network is not properly configured for "hairpin" traffic, usually when kube-proxy is running in iptables mode and Pods are connected with bridge network. The Kubelet exposes a hairpin-mode flag that allows endpoints of a Service to loadbalance back to themselves if they try to access their own Service VIP. The hairpin-mode flag must either be set to hairpin-veth or promiscuous-bridge.

The common steps to trouble shoot this are as follows:

  • Confirm hairpin-mode is set to hairpin-veth or promiscuous-bridge. You should see something like the below. hairpin-mode is set to promiscuous-bridge in the following example.
ps auxw | grep kubelet

root      3392  1.1  0.8 186804 65208 ?        Sl   00:51  11:11 /usr/local/bin/kubelet --enable-debugging-handlers=true --config=/etc/kubernetes/manifests --allow-privileged=True --v=4 --cluster-dns=10.0.0.10 --cluster-domain=cluster.local --configure-cbr0=true --cgroup-root=/ --system-cgroups=/system --hairpin-mode=promiscuous-bridge --runtime-cgroups=/docker-daemon --kubelet-cgroups=/kubelet --babysit-daemons=true --max-pods=110 --serialize-image-pulls=false --outofdisk-transition-frequency=0
  • Confirm the effective hairpin-mode. To do this, you'll have to look at kubelet log. Accessing the logs depends on your Node OS. On some OSes it is a file, such as /var/log/kubelet.log, while other OSes use journalctl to access logs. Please be noted that the effective hairpin mode may not match --hairpin-mode flag due to compatibility. Check if there is any log lines with key word hairpin in kubelet.log. There should be log lines indicating the effective hairpin mode, like something below.
I0629 00:51:43.648698    3252 kubelet.go:380] Hairpin mode set to "promiscuous-bridge"
  • If the effective hairpin mode is hairpin-veth, ensure the Kubelet has the permission to operate in /sys on node. If everything works properly, you should see something like:
for intf in /sys/devices/virtual/net/cbr0/brif/*; do cat $intf/hairpin_mode; done

1
1
1
1
  • If the effective hairpin mode is promiscuous-bridge, ensure Kubelet has the permission to manipulate linux bridge on node. If cbr0 bridge is used and configured properly, you should see:
ifconfig cbr0 |grep PROMISC

UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1460  Metric:1
  • Seek help if none of above works out.

Seek help

If you get this far, something very strange is happening. Your Service is running, has Endpoints, and your Pods are actually serving. You have DNS working, and kube-proxy does not seem to be misbehaving. And yet your Service is not working. Please let us know what is going on, so we can help investigate!

Contact us on Slack or Forum or GitHub.

What's next

Visit the troubleshooting overview document for more information.

3 - Debug a StatefulSet

This task shows you how to debug a StatefulSet.

Before you begin

  • You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster.
  • You should have a StatefulSet running that you want to investigate.

Debugging a StatefulSet

In order to list all the pods which belong to a StatefulSet, which have a label app.kubernetes.io/name=MyApp set on them, you can use the following:

kubectl get pods -l app.kubernetes.io/name=MyApp

If you find that any Pods listed are in Unknown or Terminating state for an extended period of time, refer to the Deleting StatefulSet Pods task for instructions on how to deal with them. You can debug individual Pods in a StatefulSet using the Debugging Pods guide.

What's next

Learn more about debugging an init-container.

4 - Determine the Reason for Pod Failure

This page shows how to write and read a Container termination message.

Termination messages provide a way for containers to write information about fatal events to a location where it can be easily retrieved and surfaced by tools like dashboards and monitoring software. In most cases, information that you put in a termination message should also be written to the general Kubernetes logs.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

Writing and reading a termination message

In this exercise, you create a Pod that runs one container. The manifest for that Pod specifies a command that runs when the container starts:

debug/termination.yaml 
apiVersion: v1
kind: Pod
metadata:
  name: termination-demo
spec:
  containers:
  - name: termination-demo-container
    image: debian
    command: ["/bin/sh"]
    args: ["-c", "sleep 10 && echo Sleep expired > /dev/termination-log"]

  1. Create a Pod based on the YAML configuration file:

    kubectl apply -f https://k8s.io/examples/debug/termination.yaml

    In the YAML file, in the command and args fields, you can see that the container sleeps for 10 seconds and then writes "Sleep expired" to the /dev/termination-log file. After the container writes the "Sleep expired" message, it terminates.

  2. Display information about the Pod:

    kubectl get pod termination-demo

    Repeat the preceding command until the Pod is no longer running.

  3. Display detailed information about the Pod:

    kubectl get pod termination-demo --output=yaml

    The output includes the "Sleep expired" message:

    apiVersion: v1
kind: Pod
...
    lastState:
      terminated:
        containerID: ...
        exitCode: 0
        finishedAt: ...
        message: |
          Sleep expired          
        ...

  4. Use a Go template to filter the output so that it includes only the termination message:

    kubectl get pod termination-demo -o go-template="{{range .status.containerStatuses}}{{.lastState.terminated.message}}{{end}}"

If you are running a multi-container Pod, you can use a Go template to include the container's name. By doing so, you can discover which of the containers is failing:

kubectl get pod multi-container-pod -o go-template='{{range .status.containerStatuses}}{{printf "%s:\n%s\n\n" .name .lastState.terminated.message}}{{end}}'

Customizing the termination message

Kubernetes retrieves termination messages from the termination message file specified in the terminationMessagePath field of a Container, which has a default value of /dev/termination-log. By customizing this field, you can tell Kubernetes to use a different file. Kubernetes use the contents from the specified file to populate the Container's status message on both success and failure.

The termination message is intended to be brief final status, such as an assertion failure message. The kubelet truncates messages that are longer than 4096 bytes.

The total message length across all containers is limited to 12KiB, divided equally among each container. For example, if there are 12 containers (initContainers or containers), each has 1024 bytes of available termination message space.

The default termination message path is /dev/termination-log. You cannot set the termination message path after a Pod is launched.

In the following example, the container writes termination messages to /tmp/my-log for Kubernetes to retrieve:

apiVersion: v1
kind: Pod
metadata:
  name: msg-path-demo
spec:
  containers:
  - name: msg-path-demo-container
    image: debian
    terminationMessagePath: "/tmp/my-log"

Moreover, users can set the terminationMessagePolicy field of a Container for further customization. This field defaults to "File" which means the termination messages are retrieved only from the termination message file. By setting the terminationMessagePolicy to "FallbackToLogsOnError", you can tell Kubernetes to use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller.

What's next

5 - Debug Init Containers

This page shows how to investigate problems related to the execution of Init Containers. The example command lines below refer to the Pod as <pod-name> and the Init Containers as <init-container-1> and <init-container-2>.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

To check the version, enter kubectl version.

Checking the status of Init Containers

Display the status of your pod:

kubectl get pod <pod-name>

For example, a status of Init:1/2 indicates that one of two Init Containers has completed successfully:

NAME         READY     STATUS     RESTARTS   AGE
<pod-name>   0/1       Init:1/2   0          7s

See Understanding Pod status for more examples of status values and their meanings.

Getting details about Init Containers

View more detailed information about Init Container execution:

kubectl describe pod <pod-name>

For example, a Pod with two Init Containers might show the following:

Init Containers:
  <init-container-1>:
    Container ID:    ...
    ...
    State:           Terminated
      Reason:        Completed
      Exit Code:     0
      Started:       ...
      Finished:      ...
    Ready:           True
    Restart Count:   0
    ...
  <init-container-2>:
    Container ID:    ...
    ...
    State:           Waiting
      Reason:        CrashLoopBackOff
    Last State:      Terminated
      Reason:        Error
      Exit Code:     1
      Started:       ...
      Finished:      ...
    Ready:           False
    Restart Count:   3
    ...

You can also access the Init Container statuses programmatically by reading the status.initContainerStatuses field on the Pod Spec:

kubectl get pod nginx --template '{{.status.initContainerStatuses}}'

This command will return the same information as above in raw JSON.

Accessing logs from Init Containers

Pass the Init Container name along with the Pod name to access its logs.

kubectl logs <pod-name> -c <init-container-2>

Init Containers that run a shell script print commands as they're executed. For example, you can do this in Bash by running set -x at the beginning of the script.

Understanding Pod status

A Pod status beginning with Init: summarizes the status of Init Container execution. The table below describes some example status values that you might see while debugging Init Containers.

Status Meaning
Init:N/M The Pod has M Init Containers, and N have completed so far.
Init:Error An Init Container has failed to execute.
Init:CrashLoopBackOff An Init Container has failed repeatedly.
Pending The Pod has not yet begun executing Init Containers.
PodInitializing or Running The Pod has already finished executing Init Containers.

6 - Debug Running Pods

This page explains how to debug Pods running (or crashing) on a Node.

Before you begin

  • Your Pod should already be scheduled and running. If your Pod is not yet running, start with Debugging Pods.
  • For some of the advanced debugging steps you need to know on which Node the Pod is running and have shell access to run commands on that Node. You don't need that access to run the standard debug steps that use kubectl.

Using kubectl describe pod to fetch details about pods

For this example we'll use a Deployment to create two pods, similar to the earlier example.

application/nginx-with-request.yaml 
apiVersion: apps/v1
kind: Deployment
metadata:
  name: nginx-deployment
spec:
  selector:
    matchLabels:
      app: nginx
  replicas: 2
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - name: nginx
        image: nginx
        resources:
          limits:
            memory: "128Mi"
            cpu: "500m"
        ports:
        - containerPort: 80

Create deployment by running following command:

kubectl apply -f https://k8s.io/examples/application/nginx-with-request.yaml

deployment.apps/nginx-deployment created

Check pod status by following command:

kubectl get pods

NAME                                READY   STATUS    RESTARTS   AGE
nginx-deployment-67d4bdd6f5-cx2nz   1/1     Running   0          13s
nginx-deployment-67d4bdd6f5-w6kd7   1/1     Running   0          13s

We can retrieve a lot more information about each of these pods using kubectl describe pod. For example:

kubectl describe pod nginx-deployment-67d4bdd6f5-w6kd7

Name:         nginx-deployment-67d4bdd6f5-w6kd7
Namespace:    default
Priority:     0
Node:         kube-worker-1/192.168.0.113
Start Time:   Thu, 17 Feb 2022 16:51:01 -0500
Labels:       app=nginx
              pod-template-hash=67d4bdd6f5
Annotations:  <none>
Status:       Running
IP:           10.88.0.3
IPs:
  IP:           10.88.0.3
  IP:           2001:db8::1
Controlled By:  ReplicaSet/nginx-deployment-67d4bdd6f5
Containers:
  nginx:
    Container ID:   containerd://5403af59a2b46ee5a23fb0ae4b1e077f7ca5c5fb7af16e1ab21c00e0e616462a
    Image:          nginx
    Image ID:       docker.io/library/nginx@sha256:2834dc507516af02784808c5f48b7cbe38b8ed5d0f4837f16e78d00deb7e7767
    Port:           80/TCP
    Host Port:      0/TCP
    State:          Running
      Started:      Thu, 17 Feb 2022 16:51:05 -0500
    Ready:          True
    Restart Count:  0
    Limits:
      cpu:     500m
      memory:  128Mi
    Requests:
      cpu:        500m
      memory:     128Mi
    Environment:  <none>
    Mounts:
      /var/run/secrets/kubernetes.io/serviceaccount from kube-api-access-bgsgp (ro)
Conditions:
  Type              Status
  Initialized       True 
  Ready             True 
  ContainersReady   True 
  PodScheduled      True 
Volumes:
  kube-api-access-bgsgp:
    Type:                    Projected (a volume that contains injected data from multiple sources)
    TokenExpirationSeconds:  3607
    ConfigMapName:           kube-root-ca.crt
    ConfigMapOptional:       <nil>
    DownwardAPI:             true
QoS Class:                   Guaranteed
Node-Selectors:              <none>
Tolerations:                 node.kubernetes.io/not-ready:NoExecute op=Exists for 300s
                             node.kubernetes.io/unreachable:NoExecute op=Exists for 300s
Events:
  Type    Reason     Age   From               Message
  ----    ------     ----  ----               -------
  Normal  Scheduled  34s   default-scheduler  Successfully assigned default/nginx-deployment-67d4bdd6f5-w6kd7 to kube-worker-1
  Normal  Pulling    31s   kubelet            Pulling image "nginx"
  Normal  Pulled     30s   kubelet            Successfully pulled image "nginx" in 1.146417389s
  Normal  Created    30s   kubelet            Created container nginx
  Normal  Started    30s   kubelet            Started container nginx

Here you can see configuration information about the container(s) and Pod (labels, resource requirements, etc.), as well as status information about the container(s) and Pod (state, readiness, restart count, events, etc.).

The container state is one of Waiting, Running, or Terminated. Depending on the state, additional information will be provided -- here you can see that for a container in Running state, the system tells you when the container started.

Ready tells you whether the container passed its last readiness probe. (In this case, the container does not have a readiness probe configured; the container is assumed to be ready if no readiness probe is configured.)

Restart Count tells you how many times the container has been restarted; this information can be useful for detecting crash loops in containers that are configured with a restart policy of 'always.'

Currently the only Condition associated with a Pod is the binary Ready condition, which indicates that the pod is able to service requests and should be added to the load balancing pools of all matching services.

Lastly, you see a log of recent events related to your Pod. "From" indicates the component that is logging the event. "Reason" and "Message" tell you what happened.

Example: debugging Pending Pods

A common scenario that you can detect using events is when you've created a Pod that won't fit on any node. For example, the Pod might request more resources than are free on any node, or it might specify a label selector that doesn't match any nodes. Let's say we created the previous Deployment with 5 replicas (instead of 2) and requesting 600 millicores instead of 500, on a four-node cluster where each (virtual) machine has 1 CPU. In that case one of the Pods will not be able to schedule. (Note that because of the cluster addon pods such as fluentd, skydns, etc., that run on each node, if we requested 1000 millicores then none of the Pods would be able to schedule.)

kubectl get pods

NAME                                READY     STATUS    RESTARTS   AGE
nginx-deployment-1006230814-6winp   1/1       Running   0          7m
nginx-deployment-1006230814-fmgu3   1/1       Running   0          7m
nginx-deployment-1370807587-6ekbw   1/1       Running   0          1m
nginx-deployment-1370807587-fg172   0/1       Pending   0          1m
nginx-deployment-1370807587-fz9sd   0/1       Pending   0          1m

To find out why the nginx-deployment-1370807587-fz9sd pod is not running, we can use kubectl describe pod on the pending Pod and look at its events:

kubectl describe pod nginx-deployment-1370807587-fz9sd

  Name:		nginx-deployment-1370807587-fz9sd
  Namespace:	default
  Node:		/
  Labels:		app=nginx,pod-template-hash=1370807587
  Status:		Pending
  IP:
  Controllers:	ReplicaSet/nginx-deployment-1370807587
  Containers:
    nginx:
      Image:	nginx
      Port:	80/TCP
      QoS Tier:
        memory:	Guaranteed
        cpu:	Guaranteed
      Limits:
        cpu:	1
        memory:	128Mi
      Requests:
        cpu:	1
        memory:	128Mi
      Environment Variables:
  Volumes:
    default-token-4bcbi:
      Type:	Secret (a volume populated by a Secret)
      SecretName:	default-token-4bcbi
  Events:
    FirstSeen	LastSeen	Count	From			        SubobjectPath	Type		Reason			    Message
    ---------	--------	-----	----			        -------------	--------	------			    -------
    1m		    48s		    7	    {default-scheduler }			        Warning		FailedScheduling	pod (nginx-deployment-1370807587-fz9sd) failed to fit in any node
  fit failure on node (kubernetes-node-6ta5): Node didn't have enough resource: CPU, requested: 1000, used: 1420, capacity: 2000
  fit failure on node (kubernetes-node-wul5): Node didn't have enough resource: CPU, requested: 1000, used: 1100, capacity: 2000

Here you can see the event generated by the scheduler saying that the Pod failed to schedule for reason FailedScheduling (and possibly others). The message tells us that there were not enough resources for the Pod on any of the nodes.

To correct this situation, you can use kubectl scale to update your Deployment to specify four or fewer replicas. (Or you could leave the one Pod pending, which is harmless.)

Events such as the ones you saw at the end of kubectl describe pod are persisted in etcd and provide high-level information on what is happening in the cluster. To list all events you can use

kubectl get events

but you have to remember that events are namespaced. This means that if you're interested in events for some namespaced object (e.g. what happened with Pods in namespace my-namespace) you need to explicitly provide a namespace to the command:

kubectl get events --namespace=my-namespace

To see events from all namespaces, you can use the --all-namespaces argument.

In addition to kubectl describe pod, another way to get extra information about a pod (beyond what is provided by kubectl get pod) is to pass the -o yaml output format flag to kubectl get pod. This will give you, in YAML format, even more information than kubectl describe pod--essentially all of the information the system has about the Pod. Here you will see things like annotations (which are key-value metadata without the label restrictions, that is used internally by Kubernetes system components), restart policy, ports, and volumes.

kubectl get pod nginx-deployment-1006230814-6winp -o yaml

apiVersion: v1
kind: Pod
metadata:
  creationTimestamp: "2022-02-17T21:51:01Z"
  generateName: nginx-deployment-67d4bdd6f5-
  labels:
    app: nginx
    pod-template-hash: 67d4bdd6f5
  name: nginx-deployment-67d4bdd6f5-w6kd7
  namespace: default
  ownerReferences:
  - apiVersion: apps/v1
    blockOwnerDeletion: true
    controller: true
    kind: ReplicaSet
    name: nginx-deployment-67d4bdd6f5
    uid: 7d41dfd4-84c0-4be4-88ab-cedbe626ad82
  resourceVersion: "1364"
  uid: a6501da1-0447-4262-98eb-c03d4002222e
spec:
  containers:
  - image: nginx
    imagePullPolicy: Always
    name: nginx
    ports:
    - containerPort: 80
      protocol: TCP
    resources:
      limits:
        cpu: 500m
        memory: 128Mi
      requests:
        cpu: 500m
        memory: 128Mi
    terminationMessagePath: /dev/termination-log
    terminationMessagePolicy: File
    volumeMounts:
    - mountPath: /var/run/secrets/kubernetes.io/serviceaccount
      name: kube-api-access-bgsgp
      readOnly: true
  dnsPolicy: ClusterFirst
  enableServiceLinks: true
  nodeName: kube-worker-1
  preemptionPolicy: PreemptLowerPriority
  priority: 0
  restartPolicy: Always
  schedulerName: default-scheduler
  securityContext: {}
  serviceAccount: default
  serviceAccountName: default
  terminationGracePeriodSeconds: 30
  tolerations:
  - effect: NoExecute
    key: node.kubernetes.io/not-ready
    operator: Exists
    tolerationSeconds: 300
  - effect: NoExecute
    key: node.kubernetes.io/unreachable
    operator: Exists
    tolerationSeconds: 300
  volumes:
  - name: kube-api-access-bgsgp
    projected:
      defaultMode: 420
      sources:
      - serviceAccountToken:
          expirationSeconds: 3607
          path: token
      - configMap:
          items:
          - key: ca.crt
            path: ca.crt
          name: kube-root-ca.crt
      - downwardAPI:
          items:
          - fieldRef:
              apiVersion: v1
              fieldPath: metadata.namespace
            path: namespace
status:
  conditions:
  - lastProbeTime: null
    lastTransitionTime: "2022-02-17T21:51:01Z"
    status: "True"
    type: Initialized
  - lastProbeTime: null
    lastTransitionTime: "2022-02-17T21:51:06Z"
    status: "True"
    type: Ready
  - lastProbeTime: null
    lastTransitionTime: "2022-02-17T21:51:06Z"
    status: "True"
    type: ContainersReady
  - lastProbeTime: null
    lastTransitionTime: "2022-02-17T21:51:01Z"
    status: "True"
    type: PodScheduled
  containerStatuses:
  - containerID: containerd://5403af59a2b46ee5a23fb0ae4b1e077f7ca5c5fb7af16e1ab21c00e0e616462a
    image: docker.io/library/nginx:latest
    imageID: docker.io/library/nginx@sha256:2834dc507516af02784808c5f48b7cbe38b8ed5d0f4837f16e78d00deb7e7767
    lastState: {}
    name: nginx
    ready: true
    restartCount: 0
    started: true
    state:
      running:
        startedAt: "2022-02-17T21:51:05Z"
  hostIP: 192.168.0.113
  phase: Running
  podIP: 10.88.0.3
  podIPs:
  - ip: 10.88.0.3
  - ip: 2001:db8::1
  qosClass: Guaranteed
  startTime: "2022-02-17T21:51:01Z"

Examining pod logs

First, look at the logs of the affected container:

kubectl logs ${POD_NAME} ${CONTAINER_NAME}

If your container has previously crashed, you can access the previous container's crash log with:

kubectl logs --previous ${POD_NAME} ${CONTAINER_NAME}

Debugging with container exec

If the container image includes debugging utilities, as is the case with images built from Linux and Windows OS base images, you can run commands inside a specific container with kubectl exec:

kubectl exec ${POD_NAME} -c ${CONTAINER_NAME} -- ${CMD} ${ARG1} ${ARG2} ... ${ARGN}

As an example, to look at the logs from a running Cassandra pod, you might run

kubectl exec cassandra -- cat /var/log/cassandra/system.log

You can run a shell that's connected to your terminal using the -i and -t arguments to kubectl exec, for example:

kubectl exec -it cassandra -- sh

For more details, see Get a Shell to a Running Container.

Debugging with an ephemeral debug container

FEATURE STATE: Kubernetes v1.25 [stable]

Ephemeral containers are useful for interactive troubleshooting when kubectl exec is insufficient because a container has crashed or a container image doesn't include debugging utilities, such as with distroless images.

Example debugging using ephemeral containers

You can use the kubectl debug command to add ephemeral containers to a running Pod. First, create a pod for the example:

kubectl run ephemeral-demo --image=registry.k8s.io/pause:3.1 --restart=Never

The examples in this section use the pause container image because it does not contain debugging utilities, but this method works with all container images.

If you attempt to use kubectl exec to create a shell you will see an error because there is no shell in this container image.

kubectl exec -it ephemeral-demo -- sh

OCI runtime exec failed: exec failed: container_linux.go:346: starting container process caused "exec: \"sh\": executable file not found in $PATH": unknown

You can instead add a debugging container using kubectl debug. If you specify the -i/--interactive argument, kubectl will automatically attach to the console of the Ephemeral Container.

kubectl debug -it ephemeral-demo --image=busybox:1.28 --target=ephemeral-demo

Defaulting debug container name to debugger-8xzrl.
If you don't see a command prompt, try pressing enter.
/ #

This command adds a new busybox container and attaches to it. The --target parameter targets the process namespace of another container. It's necessary here because kubectl run does not enable process namespace sharing in the pod it creates.

You can view the state of the newly created ephemeral container using kubectl describe:

kubectl describe pod ephemeral-demo

...
Ephemeral Containers:
  debugger-8xzrl:
    Container ID:   docker://b888f9adfd15bd5739fefaa39e1df4dd3c617b9902082b1cfdc29c4028ffb2eb
    Image:          busybox
    Image ID:       docker-pullable://busybox@sha256:1828edd60c5efd34b2bf5dd3282ec0cc04d47b2ff9caa0b6d4f07a21d1c08084
    Port:           <none>
    Host Port:      <none>
    State:          Running
      Started:      Wed, 12 Feb 2020 14:25:42 +0100
    Ready:          False
    Restart Count:  0
    Environment:    <none>
    Mounts:         <none>
...

Use kubectl delete to remove the Pod when you're finished:

kubectl delete pod ephemeral-demo

Debugging using a copy of the Pod

Sometimes Pod configuration options make it difficult to troubleshoot in certain situations. For example, you can't run kubectl exec to troubleshoot your container if your container image does not include a shell or if your application crashes on startup. In these situations you can use kubectl debug to create a copy of the Pod with configuration values changed to aid debugging.

Copying a Pod while adding a new container

Adding a new container can be useful when your application is running but not behaving as you expect and you'd like to add additional troubleshooting utilities to the Pod.

For example, maybe your application's container images are built on busybox but you need debugging utilities not included in busybox. You can simulate this scenario using kubectl run:

kubectl run myapp --image=busybox:1.28 --restart=Never -- sleep 1d

Run this command to create a copy of myapp named myapp-debug that adds a new Ubuntu container for debugging:

kubectl debug myapp -it --image=ubuntu --share-processes --copy-to=myapp-debug

Defaulting debug container name to debugger-w7xmf.
If you don't see a command prompt, try pressing enter.
root@myapp-debug:/#

Don't forget to clean up the debugging Pod when you're finished with it:

kubectl delete pod myapp myapp-debug

Copying a Pod while changing its command

Sometimes it's useful to change the command for a container, for example to add a debugging flag or because the application is crashing.

To simulate a crashing application, use kubectl run to create a container that immediately exits:

kubectl run --image=busybox:1.28 myapp -- false

You can see using kubectl describe pod myapp that this container is crashing:

Containers:
  myapp:
    Image:         busybox
    ...
    Args:
      false
    State:          Waiting
      Reason:       CrashLoopBackOff
    Last State:     Terminated
      Reason:       Error
      Exit Code:    1

You can use kubectl debug to create a copy of this Pod with the command changed to an interactive shell:

kubectl debug myapp -it --copy-to=myapp-debug --container=myapp -- sh

If you don't see a command prompt, try pressing enter.
/ #

Now you have an interactive shell that you can use to perform tasks like checking filesystem paths or running the container command manually.

Don't forget to clean up the debugging Pod when you're finished with it:

kubectl delete pod myapp myapp-debug

Copying a Pod while changing container images

In some situations you may want to change a misbehaving Pod from its normal production container images to an image containing a debugging build or additional utilities.

As an example, create a Pod using kubectl run:

kubectl run myapp --image=busybox:1.28 --restart=Never -- sleep 1d

Now use kubectl debug to make a copy and change its container image to ubuntu:

kubectl debug myapp --copy-to=myapp-debug --set-image=*=ubuntu

The syntax of --set-image uses the same container_name=image syntax as kubectl set image. *=ubuntu means change the image of all containers to ubuntu.

Don't forget to clean up the debugging Pod when you're finished with it:

kubectl delete pod myapp myapp-debug

Debugging via a shell on the node

If none of these approaches work, you can find the Node on which the Pod is running and create a Pod running on the Node. To create an interactive shell on a Node using kubectl debug, run:

kubectl debug node/mynode -it --image=ubuntu

Creating debugging pod node-debugger-mynode-pdx84 with container debugger on node mynode.
If you don't see a command prompt, try pressing enter.
root@ek8s:/#

When creating a debugging session on a node, keep in mind that:

  • kubectl debug automatically generates the name of the new Pod based on the name of the Node.
  • The root filesystem of the Node will be mounted at /host.
  • The container runs in the host IPC, Network, and PID namespaces, although the pod isn't privileged, so reading some process information may fail, and chroot /host may fail.
  • If you need a privileged pod, create it manually or use the --profile=sysadmin flag.

Don't forget to clean up the debugging Pod when you're finished with it:

kubectl delete pod node-debugger-mynode-pdx84

Debugging a Pod or Node while applying a profile

When using kubectl debug to debug a node via a debugging Pod, a Pod via an ephemeral container, or a copied Pod, you can apply a profile to them. By applying a profile, specific properties such as securityContext are set, allowing for adaptation to various scenarios. There are two types of profiles, static profile and custom profile.

Applying a Static Profile

A static profile is a set of predefined properties, and you can apply them using the --profile flag. The available profiles are as follows:

Profile Description
legacy A set of properties backwards compatibility with 1.22 behavior
general A reasonable set of generic properties for each debugging journey
baseline A set of properties compatible with PodSecurityStandard baseline policy
restricted A set of properties compatible with PodSecurityStandard restricted policy
netadmin A set of properties including Network Administrator privileges
sysadmin A set of properties including System Administrator (root) privileges

Assume that you create a Pod and debug it. First, create a Pod named myapp as an example:

kubectl run myapp --image=busybox:1.28 --restart=Never -- sleep 1d

Then, debug the Pod using an ephemeral container. If the ephemeral container needs to have privilege, you can use the sysadmin profile:

kubectl debug -it myapp --image=busybox:1.28 --target=myapp --profile=sysadmin

Targeting container "myapp". If you don't see processes from this container it may be because the container runtime doesn't support this feature.
Defaulting debug container name to debugger-6kg4x.
If you don't see a command prompt, try pressing enter.
/ #

Check the capabilities of the ephemeral container process by running the following command inside the container:

/ # grep Cap /proc/$$/status

...
CapPrm:	000001ffffffffff
CapEff:	000001ffffffffff
...

This means the container process is granted full capabilities as a privileged container by applying sysadmin profile. See more details about capabilities.

You can also check that the ephemeral container was created as a privileged container:

kubectl get pod myapp -o jsonpath='{.spec.ephemeralContainers[0].securityContext}'

{"privileged":true}

Clean up the Pod when you're finished with it:

kubectl delete pod myapp

Applying Custom Profile

FEATURE STATE: Kubernetes v1.31 [beta]

You can define a partial container spec for debugging as a custom profile in either YAML or JSON format, and apply it using the --custom flag.

Create a Pod named myapp as an example:

kubectl run myapp --image=busybox:1.28 --restart=Never -- sleep 1d

Create a custom profile in YAML or JSON format. Here, create a YAML format file named custom-profile.yaml:

env:
- name: ENV_VAR_1
  value: value_1
- name: ENV_VAR_2
  value: value_2
securityContext:
  capabilities:
    add:
    - NET_ADMIN
    - SYS_TIME

Run this command to debug the Pod using an ephemeral container with the custom profile:

kubectl debug -it myapp --image=busybox:1.28 --target=myapp --profile=general --custom=custom-profile.yaml

You can check that the ephemeral container has been added to the target Pod with the custom profile applied:

kubectl get pod myapp -o jsonpath='{.spec.ephemeralContainers[0].env}'

[{"name":"ENV_VAR_1","value":"value_1"},{"name":"ENV_VAR_2","value":"value_2"}]

kubectl get pod myapp -o jsonpath='{.spec.ephemeralContainers[0].securityContext}'

{"capabilities":{"add":["NET_ADMIN","SYS_TIME"]}}

Clean up the Pod when you're finished with it:

kubectl delete pod myapp

7 - Get a Shell to a Running Container

This page shows how to use kubectl exec to get a shell to a running container.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

Getting a shell to a container

In this exercise, you create a Pod that has one container. The container runs the nginx image. Here is the configuration file for the Pod:

application/shell-demo.yaml 
apiVersion: v1
kind: Pod
metadata:
  name: shell-demo
spec:
  volumes:
  - name: shared-data
    emptyDir: {}
  containers:
  - name: nginx
    image: nginx
    volumeMounts:
    - name: shared-data
      mountPath: /usr/share/nginx/html
  hostNetwork: true
  dnsPolicy: Default

Create the Pod:

kubectl apply -f https://k8s.io/examples/application/shell-demo.yaml

Verify that the container is running:

kubectl get pod shell-demo

Get a shell to the running container:

kubectl exec --stdin --tty shell-demo -- /bin/bash

In your shell, list the root directory:

# Run this inside the container
ls /

In your shell, experiment with other commands. Here are some examples:

# You can run these example commands inside the container
ls /
cat /proc/mounts
cat /proc/1/maps
apt-get update
apt-get install -y tcpdump
tcpdump
apt-get install -y lsof
lsof
apt-get install -y procps
ps aux
ps aux | grep nginx

Writing the root page for nginx

Look again at the configuration file for your Pod. The Pod has an emptyDir volume, and the container mounts the volume at /usr/share/nginx/html.

In your shell, create an index.html file in the /usr/share/nginx/html directory:

# Run this inside the container
echo 'Hello shell demo' > /usr/share/nginx/html/index.html

In your shell, send a GET request to the nginx server:

# Run this in the shell inside your container
apt-get update
apt-get install curl
curl http://localhost/

The output shows the text that you wrote to the index.html file:

Hello shell demo

When you are finished with your shell, enter exit.

exit # To quit the shell in the container

Running individual commands in a container

In an ordinary command window, not your shell, list the environment variables in the running container:

kubectl exec shell-demo -- env

Experiment with running other commands. Here are some examples:

kubectl exec shell-demo -- ps aux
kubectl exec shell-demo -- ls /
kubectl exec shell-demo -- cat /proc/1/mounts

Opening a shell when a Pod has more than one container

If a Pod has more than one container, use --container or -c to specify a container in the kubectl exec command. For example, suppose you have a Pod named my-pod, and the Pod has two containers named main-app and helper-app. The following command would open a shell to the main-app container.

kubectl exec -i -t my-pod --container main-app -- /bin/bash

What's next